Asset Publisher

Microcam

Microcam

This page has been archived and is no longer updated.Payload for future planetary exploration missions (Mercury, Mars, Venus, outer planets and their moons, asteroids) increasingly require resource reductions, such as volume, mass, power and data rate. This applies obviously even more for instruments on board landers, balloons or aerobots, microprobes and rovers. They will be used in the future to improve our knowledge of the distant surfaces, sub-surfaces and atmospheres, for which remote observation has reached limits. The assessment of the critical technologies for these missions is an essential pre-requisite to their realization.

Within the frame of the BepiColombo mission, a planetary microcamera and its mechanical/control system have been studied for the Mercury Surface Element (MSE). This study has lead to the development of a complete conceptual design (as shown below) and the realization of a fully functional breadboard of the whole system (Jena Optronik):

  • An imaging system based on two camera heads for stereoscopic vision plus an illuminating device for night observation
  • The detector of the camera head, based on an active pixel sensor (APS)
  • A deployable mechanical structure to compensate the lander attitude and enable 360 degrees panoramic pointing capability

The Planet MicroCam mechatronics system breadboard

The developed breadboard is based on commercial components, both camera heads are simple commercial off the shelf units and do not represent the design in form, mass and performance.

SCI-AI is currently planning an activity to focus on the imaging system performances at extremely low temperature, around 100 K (for example, night side of the planet Mercury or the Moon's surface temperature). Such a low operating temperature requires an optimized optical, electrical, thermal and mechanical design. Many issues have indeed to be addressed:

  • Low temperature electro-optical behaviour of APS (Active Pixel Sensor) and surrounding parts
  • Low temperature optical design and testing
  • Optimum thermal design to limit gradients within the imaging system (and therefore mechanical stress) while using minimum resources (no heater)

Radiation tolerance will also be integrated in the overall design constraints. Eventually, a "flight-like" imaging system will be manufactured and tested, serving as a technology demonstrator.

Last Update: 1 September 2019
29-Mar-2024 04:36 UT

ShortUrl Portlet

Shortcut URL

https://sci.esa.int/s/w5qd9Nw

Images And Videos

Related Publications

Related Links

See Also

Documentation